Unlike most external flashes, the FL-40 Dedicated
Flash was created specifically for filmless digital photography, not borrowed
from an existing film flash unit design. So the FL-40 provides even coverage
of light from the center to the edge of the image—for the demands of
precise filmless digital photography. And with its industry-standard hot-shoe
design, the versatile FL-40 is designed to meet the needs of both today’s
and tomorrow’s filmless digital cameras (and for direct use on the C-2500L
SLR).
C-2500L PC Sync Adapter
Connects C-2500L to third-party external
flash.
FL-40 Flash
Designed specifically for use with the C-2500
SLR Filmless Digital Camera (though it can be used with other cameras with
external hot-shoe flash connections), the FL-40/C-2500’s professional
functions include:
-
Exposure control of +/- 2-step in 1/3 steps,
TTL flash, 1st or 2nd curtain flash sync and flash sync from 1/250 sec. to
8 sec.—and the FL-40 flash even auto zooms to match the focal length
of the C-2500L’s 9.2 to 28mm lens (36 to 110mm equivalent)
-
With built-in coverage for the B-28 wide
angle and 1.45 telephoto filmless digital lenses and an additional low-light
illuminator, the FL-40 can improve the focus and flash range to more than
30 feet in poorly lit and dim conditions
-
Swivel and bounce head of the FL-40 offers
a range of 90 degrees up and 270 degrees swivel—for complete creative
control of the flash
-
Guide Number of 40m or 130ft
-
TTL and Auto ranges to over 30 feet at
ISO 100
-
Manual Guide Number flash, controlled by
FL-40
-
Through-the-lens TTL camera-controlled
by the C-2500L SLR
-
Normal sensor automatic flash controlled
by FL-40
-
Flash exposure confirmation
-
Illuminated full information flash control
LCD
-
Powered by four AA Alkaline, Ni-Cad, or
Ni-MH batteries (for best performance)
FL-BK01 Flash Bracket
Moves FL-40 external flash away from lens barrel
for move even lighting and reduced red-eye.
FL-CB01 TTL-TTL Cable
Connects certain cameras to FLBK01 flash bracket.
For use with the following CAMEDIA digital cameras: E-100RS, C-4040Z, C-3040Z,
C-3030Z, C-3000Z, C-2040Z, C-700UZ, C-2100UZ.
FL-CB02 Hot Shoe Cable
Connects certain cameras to FLBK01 flash bracket.
For use with the following cameras: E-10, E-20N, C-2500L.
FL-CB03 PC Socket Cable
Connects certain cameras to FLBK01 flash bracket.
For use with the following cameras: E-100RS, D-620L, C-4040Z, C-3040Z, C-3030Z,
C-3000Z, C-2040Z, C-2020Z, C-2000Z, C-700UZ.
FL-CB04 TTL-PC Cable
Enables certain cameras to use studio strobes.
See accessory compatibility chart for camera models.
FL-CB05 Hot Shoe Flash Cable
Hot shoe cable to be used with FL-40 or any other standard hot shoe flash.
See accessory compatibility chart for compatible cameras.
